ILI9322_init...... Enabling TVE controller @@===in gpio0_16high value 110000 Storlink SL351x Boot Loader [Linux2], version 1.0.9 Built by linux, 10:28:03, Feb 23 2009 Processor: SL3516c3 CPU Rate: 300000000 AHB Bus Clock:150MHz Ratio:2/1 MAC 1 Address: 00:50:C2:11:11:11 MAC 2 Address: 00:50:C2:22:22:22 inet addr: 192.168.0.200/255.255.255.0 ==> enter ^C to abort booting within 1 seconds ...... Load kernel from 0x30040000 to 0x1600000 size 11710656 v3 check Image header (0x00000024): magic : 0x20080321 size : 11710496 (0xb2b020) offset : 0x00000000 devname: '/dev/mtdblock/1' digest : Advance to next block : offset=11710656(0xb2b0c0), size=11710656(0xb2b0c0) Uncompressing Linux...7zip decompressing ... 7zip decompress success done, booting the kernel. FTC_FOTG2XX : registered host c7c7cc00 FTC_FOTG2XX_1 : registered host c7c7c400 test_interrupt interrupt init started: BusyBox v1.00 (2009.04.20-06:38+0000) multi-call binary Starting pid 393, console /dev/console: '/etc/init.d/rcS' [/etc/init.d/S03config.sh] Mounting proc and var ... Using /lib/modules/ufsd.ko ufsd: module license 'Commertial product' taints kernel. ufsd: driver loaded UFSD version 6.1 (Jul 31 2007, 21:51:29) NTFS read/write support included $Id: ufsdvfs.c,v 1.109 2007/07/31 12:01:57 shura Exp $ ufsd: address 0xbf000000 Starting udevd... Starting udevstart... Starting udevstart... Start xmldb ... [/etc/scripts/misc/profile.sh] get ... [/etc/scripts/misc/defnodes.sh] ... [/etc/defnodes/S10setext.sh] ... PHP [/etc/defnodes/S11setnodes.php] ... PHP [/etc/defnodes/S12features.php] ... PHP [/etc/defnodes/S13flashspeed.php] ... [/etc/defnodes/S14wps_upnp.sh] ... PHP [/etc/defnodes/S20setnodes.php] ... devdata: not found VFS: Can't find ext3 filesystem on dev mtdblock5. VFS: Can't find an ext2 filesystem on dev mtdblock5. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: invalid media value (0xe4) VFS: Can't find a valid FAT filesystem on dev mtdblock5. FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! FAT: invalid media value (0xe4) VFS: Can't find a valid FAT filesystem on dev mtdblock5. SQUASHFS error: Can't find a SQUASHFS superblock on mtdblock5 ufsd: failed to mount mtdblock5 mount: Mounting /dev/mtdblock/5 on /www/locale/alt failed: Invalid argument PHP [/etc/defnodes/S40brand.php] ... [/etc/scripts/misc/defnodes.sh] Done !! [/etc/templates/timezone.sh] ... zone : 5 gen : PST+08:00 [/etc/templates/logs.sh] ... [/var/run/logs_run.sh] ... Using /lib/modules/nas_gpio_access.ko nas_gpio Access Init. start fresetd ... Factory reset time : 5 secs System reset time : 2 secs Inserting modules ... Using /lib/modules/ifresetcnt.ko Network interface reset count v1.0 Storlink eth0 address = 0022B0F0C81C Can't find version control GMAC-0 Flow Control Enable. Storlink eth0 address = 0022B0F0C81C Enable MAC Flow Control... set interrupt f Storlink eth1 address = 0022B0F0C81D Can't find version control GMAC-1 Flow Control Enable. Storlink eth1 address = 0022B0F0C81D Enable MAC Flow Control... [/etc/templates/webs.sh] start ... [/var/run/webs_start.sh] ... Starting HTTPD ... set time to 2000/01/01 Sat Jan 1 00:00:00 PST 2000 [/etc/init.d/S03config.sh] done! [/etc/init.d/S10system.sh] start scheduled ... [/etc/templates/scheduled.sh] start ... [/var/run/scheduled_start.sh] ... Start scheduled ... setup layout ... [/etc/scripts/layout.sh] ... [/var/run/layout_start.sh] ... Start router layout ... device eth0 entered promiscuous mode br_stp_recalculate_bridge_id: p->dev->dev_addr[0]-[5]= 0:22:b0:f0:c8:1c interface ra0 does not exist! joel disable stun .. [/etc/scripts/network_usb.sh] start... insmod: /lib/modules/2.6.15: No such file or directory Using /lib/modules/NetUSB.ko NetUSB: NetUSB 0.9241, KCodes co. 2009 NetUSB: SoftwareBus start usbcore: registered new driver USB General Driver NetUSB: Bind to br0 NetUSB: tcpConnector() started... NetUSB: Accepting... start LAN ... [/etc/templates/lan.sh] ... [/var/run/lan_start.sh] ... Start LAN (br0/192.168.0.1/255.255.255.0)... Start DHCP server (br0) ... Start igmp ... [/etc/templates/igmpproxy.sh] start ... [/var/run/igmpproxy_start.sh] ... IGMP proxy is not enabled! enable LAN ports ... [/etc/scripts/enlan.sh] ... !!!!!!!!!!!!!!! TODO [/etc/scripts/enlan.sh] !!!!!!!!!!!!!! start WLAN ... [/etc/templates/wlan.sh] start ... [/etc/templates/wifi/wlan_sch.sh] stop ... Hello from hostapd.ra0.conf [/var/run/wlan_start.sh] ... Start WLAN interface ra0 ... restart WLAN driver ... Using /lib/modules/rt2880_iNIC.ko RT2880 iNIC: 802.11n WLAN PCI driver v1.1.8.3 (Oct. 15, 2008) RT2880 iNIC: pci dev 0000:00:0c.0 (id 1814:0801 rev 00) PCI: enabling device 0000:00:0c.0 (0140 -> 0142) rt->regs = ca820000 ===> Get MAC from iNIC ============= Init Thread =================== RacfgTaskThread pid = 743 RacfgBacklogThread pid = 744 ra0: Ralink iNIC at 0xca820000, 00:43:0c:00:00:00, IRQ 67 iNIC Open ra0 ADDR0 = 58000008, ADDR1 = 58100008 CMD = 0156, STATUS = 04a0 LATENCY = 00, CACHE LINE SIZE = 08 INT LINE = 67 Reset Card ADDR0 = 58000008, ADDR1 = 58100008 CMD = 0156, STATUS = 04a0 INT LINE = 67 ### LATENCY = 20, CACHE LINE SIZE = 08 PDMA_RST_IDX = 0 PDMA_GLO_CFG = 00000020 TX_MAX_CNT0 = 00000080 2. reg = 00000020 2. PDMA_GLO_CFG = 0000006d, reg = 00000065 RACFG_CMD_BOOT_NOTIFY Op mode = 1 Open file: /etc/Wireless/RT2880/iNIC_ap.bin Open file: /var/run/RT2880AP.dat BssidNum=1 Wait for boot done... RACFG_CMD_BOOT_INITCFG(0) Send Init Cfg Data Done(1 packets) RACFG_CMD_BOOT_UPLOAD(0) RACFG_CMD_BOOT_UPLOAD(1) RACFG_CMD_BOOT_UPLOAD(2) CRC:01 08 14 18 49 86 1c 7f 22 32 2e 30 2e 30 2e 30 22 00 00 00 32 30 30 39 30 33 31 30 00 00 00 00 00 00 00 00 78 83 07 00 Send RT2880 Firmware Done =================================== version: "2.0.0.0" size: 492408 bytes date: 20090310 =================================== Send STARTUP to RT2880 Close Firmware file RACFG_CMD_BOOT_STARTUP Update MAC(0)=00:22:b0:f0:c8:1c GMAC-1 link down SIOCSIFTXQLEN: No such device SIOCGIFFLAGS: No such device /proc/net/br_forward_br0: cannot create Start WLAN interface ra0 Done !!! [/etc/templates/wifi/wlan_sch.sh] start ... [/var/run/wlan_sch_start.sh] ... [/etc/templates/wifi/wlan_sch_run.sh] restart ... [/var/run/wlan_sch_run_start.sh] ... Start WLAN layout ... device ra0 entered promiscuous mode br_stp_recalculate_bridge_id: p->dev->dev_addr[0]-[5]= 0:22:b0:f0:c8:1c br_stp_recalculate_bridge_id: p->dev->dev_addr[0]-[5]= 0:22:b0:f0:c8:1c start Application ... Configuration file: /var/run/hostapd.ra0.conf [/usr/sbin/submit] GROUP_ADD ... [/etc/templates/group.sh] ... ralink_init: Initiating ralink_wireless_event_init... [/usr/sbin/submit] USER_ADD ... [/usr/sbin/submit] PURE-FTPD ... [/etc/templates/user.sh] ... Using interface ra0 with hwaddr 00:22:b0:f0:c8:1c and ssid 'test' =>=>=> set ssid to test [/var/run/group_add.sh] ... GMK - hexdump(len=32): 68 47 be 13 a8 1d 95 03 74 88 7c 2a 2f 4f f0 f8 22 ef 20 eb 14 05 3a a3 a0 f8 9d 1f 17 4e 5a 09 GTK - hexdump(len=32): 81 ec db d7 bb fc 67 af 52 52 c0 8b ea e6 a0 df b7 de b8 41 7a d2 88 41 4c bf a6 9a a0 18 18 22 hostapd_setup_interface: return 0 [/var/run/user_add.sh] ... rm: cannot remove `/var/smbpasswd': No such file or directory [/usr/sbin/submit] NET_ACCESS ... [/etc/templates/pure_ftpd.sh] ... Changing password for tp [/usr/sbin/submit] UPNP_AV_START ... [/etc/templates/network_access.sh] ... [/usr/sbin/submit] ITUNES_START ... [/etc/templates/upnp_av.sh] ... [/var/run/upnp_av_start.sh] ... No: not found [/etc/templates/itunes_server.sh] ... [/usr/sbin/submit] BT_START ... Password changed. Start smbd... adduser: [/var/run/itunes_server_start.sh] ... No: not found start Guest Zone [/etc/templates/bt.sh] ... [/var/run/bt_start.sh] ... [/etc/templates/gzone.sh] ... generate_start ! BT is disabled ! [/var/run/prescan_start.sh] ... Upnp-av server is disabled ! tp: login already in use Start pure_ftpd... [/var/run/gzone_start.sh] ... [/var/run/network_access_start.sh] ... Start smbd... [/etc/templates/enable_gzone.sh] ... add passwd from file dddtp,39233923 Unknown parameter encountered: "read size" Ignoring unknown parameter "read size" Unknown parameter encountered: "read prediction" Ignoring unknown parameter "read prediction" [/var/run/enable_gzone_start.sh] ... syntax error start RG ... startsmbfilepwent_internal: file /var/smbpasswd did not exist. File successfully created. [/etc/templates/rg.sh] start ... account_policy_get: tdb_fetch_uint32 failed for field 1 (min password length), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 2 (password history), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 3 (user must logon to change password), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 4 (maximum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 5 (minimum password age), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 6 (lockout duration), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 7 (reset count minutes), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 8 (bad lockout attempt), returning 0 [/var/run/rg_start.sh] ... account_policy_get: tdb_fetch_uint32 failed for field 9 (disconnect time), returning 0 account_policy_get: tdb_fetch_uint32 failed for field 10 (refuse machine password change), returning 0 Added user tp. Added user nobody. Using /lib/modules/ifresetcnt.ko insmod: cannot insert `/lib/modules/ifresetcnt.ko': File exists (-1): File exists insmod: /lib/modules/2.6.15: No such file or directory insmod: ip_conntrack_ike_m.ko: no module by that name found insmod: /lib/modules/2.6.15: No such file or directory insmod: ip_conntrack_esp_m.ko: no module by that name found insmod: /lib/modules/2.6.15: No such file or directory insmod: ip_conntrack_proto_esp_m.ko: no module by that name found insmod: /lib/modules/2.6.15: No such file or directory insmod: ip_nat_proto_esp_m.ko: no module by that name found iptables: No chain/target/match by that name sendto_unsock(/var/run/portt.unixsocket, flush) /proc/sys/net/ipv4/arp_flood_burst: cannot create /proc/sys/net/ipv4/arp_flood_cost: cannot create start DNRD ... [/etc/templates/dnrd.sh] ... [/var/run/dnrd_start.sh] ... Start DNRD ... Start telnetd ... start UPNPD ... [/etc/templates/upnpd.sh] ... Notice: caching turned off [/var/run/upnpd_start.sh] ... Starting UPnP ... [/var/run/upnp_alive.sh] ... start WAN ... Set WAN port media type 0 rtl8366rb_setEthernetPHY port 4 type 0 [/etc/templates/wan.sh] start ... [/var/run/wan_start.sh] ... insmod: /lib/modules/2.6.15: No such file or directory insmod: sw_tcpip.ko: no module by that name found It is the DHCP mod start!! DHCP client on WAN(eth1) CloneMAC() ... start LLD2D ... [/etc/templates/lld2d.sh] ... [/var/run/lld2d_start.sh] ... Start LLD2 daemon ... start fcrss_server ... [/etc/templates/fcrss_server.sh] start... start Neaps ... [/etc/templates/neaps.sh] start ... [/var/run/neaps_start.sh] ... Start Neap Server ... start igmpproxy ... [/etc/templates/igmpproxy.sh] start ... [/var/run/igmpproxy_stop.sh] ... IGMP proxy is not started ! [/var/run/igmpproxy_start.sh] ... IGMP proxy is not enabled! start LCD Display ... [/etc/templates/lcd_display.sh] ... /etc/templates/alpha_nas-loop.sh control vmmemory at 40 M start Wake on LAN ... [/etc/templates/wol.sh] ... [/etc/init.d/S10system.sh] done! rcS done! [/var/run/wol_start.sh] ... Starting pid 1294, console /dev/console: '/bin/sh' BusyBox v1.00 (2009.04.20-06:38+0000) Built-in shell (msh) Enter 'help' for a list of built-in commands. #